Waterlox Original Gallon

Waterlox Sealer / Finish (VOC Compliant)

$87.00

Product Description

This is Waterlox Original Sealer Finish in a VOC Compliant Formula for use in CT, DC, DE, IL, IN, MA, MD, ME, NH, NJ, NY, OH, PA, RI, and parts of northern Virginia. Not for use in SCAQMD in CA. CA customers should contact Waterlox directly.

The new VOC Compliant Formula looks, applies, dries, flows and levels like the Original product formulation with approved levels of VOC’s for use within regulated states.

Waterlox feels that you will experience little if any changes in their new formulations even though there are differences in the actual make-up of the formulation. This is primarily due to the fact that the core ingredients remain the same (tung oil, phenolic resin, etc.). Waterlox Tung oil products penetrate better than linseed oil to seal wood fibers beneath the surface.

  • Unlike urethane, Tung oil products form a protective finish that won’t chip, peel, crack or wrinkle.
  • Resists alcohol, hot liquids, stain, and household chemicals.
  • Give wood a rich, hand-rubbed appearance by enhancing the grain.
  • Easy to apply and use.
  • Easy to maintain surfaces with mild detergent and water – no special cleaning process required.

Medium Sheen (50-55° Gloss Level)
26% Solids for maximum penetration; no thinning necessary
Applies easily with a lambswool applicator (floors), China bristle brush, roller, cloth or spray. Sanding is not necessary between coats for adhesion purposes.
Non-Toxic when dry.
Coverage: 500 square feet per gallon per coat
Uses:
Use as a sealer only or in multiple coats (3-4 total, depending on species of wood) as a sealer and finish.
Excellent for use as a primer, tie-coat or paint additive to improve adhesion.
Exceptional adhesion to oily, dense, exotic woods like teak, rosewood and Ipe.
Use on interior wood surfaces including floors, windows, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames, fly fishing rods, gun stocks, and various woodworking projects.
Use on porous interior surfaces such as slate, brick, stone, tile, linoleum or cement to seal and prevent chalking and dusting*.
For exterior projects as a sealer only, use 2 coats to prime, followed by 1 or 2 coats of Marine Finish.
Technical Information

Several states have adopted Architectural Coatings Rules separate from the National Architectural Coatings Rule.
These rules dictate the VOC (Volatile Organic Compound) content of regulated coatings to be used within the state. These laws are intended to reduce solvent emissions which are believed to affect air quality.

Additional Information

Weight 12 lbs
Dimensions 7 x 7 x 10 in

Coverage

Original Finish Satin Finish High Gloss Finish
Medium Sheen Satin / Matte Finish High Gloss Finish

500 sq ft / Gallon

500 sq ft / Gallon 500 sq ft / Gallon
3-4 Coat system is recommended, 3-4 coat system is recommended. Use 2-3 coats of Waterlox Original Sealer / Finish as a sealer and follow with1 coat of Waterlox Original Satin Finish 3-4 coat system is recommended. Use 1-2 coats of Waterlox Original Sealer / Finish as a sealer and follow with 2 coats of Waterlox original High Gloss Finish
SKU: TB-5284